ANUTRON-0520 is a hard, stiff, strong, dimensionally stable material that absorbs very little water. It has good gas barrier properties and good chemical resistance except to alkalis (which hydrolyse it). ANUTRON-0520 is widely known in the form of biaxially oriented and thermally stabilised application Another important quality of ANUTRON-0520 is th th its relatively lighter weight (approximately 1/8 the weight of bronze, 1/7 the weight of steel, and half the weight of aluminum) which reduces both inertial and static loads and eases the handling of large components during maintenance or replacement procedures. ANUTRON-0520 has balanced mechanical properties and its exceptional machinability makes it the ideal material for a wide range of applications such as gear, gear-racks, rollers, bearing blocks, wear plates, bushing, slipper pads, sliding bars, pulleys, etc
ANUTRON-0520 is also available as stock item in basic shapes (Rods, Sheets, Blocks, Squares and RectangularBars) with machining instructions.
| Property | Unit | Test Method | Value |
|---|---|---|---|
| Specific Gravity | gm/cc | ASTM D 792 | 1.39 |
| Tensile strength | Kgf/cm² | ASTM D 638 | 740 |
| Tearing Strength | % | ASTM D 638 | >50 |
| Compressive Strength at 10% deformation | Kgf/cm² | ASTM D 695 | 850 |
| Modulus of Elasticity (Bending) | Kgf/cm² | ASTM D 638 | 35,000 |
| Impact strength (Notch) | KJ/m² | ASTM D 256 | >4 |
| Impact strenth | KJ/m² | ASTM D 256 | no break |
| Hardness Durometer at 23 C | Shore D | ASTM D 2240 | 100 |
| Hardness Rockwell | Scale R | ASTM D 785 | 110 |
| Deflection temperature at 4.6Kgf/cm (66 psi) (HDT) | °C | ASTM D 648 | 155--165 |
| Maximum service temperature | |||
| Continuous | °C | 120 | |
| Intermittent | °C | 150 | |
| Melting Point | °C | ASTM D 3418 | 250 |
| Co-efficient of friction | ASTM D 3702 | ||
| against self | 0.20-0.40 | ||
| Dielectric Strength (short term 0.5mm thick) | Kv/mm | 17 | |
| Flammability | ASTM D 149 | Self Extinguishing |
Anuman Engineering Industries is an emerging manufacturing unit in the field of Engineering Plastic with a vast experience of over six-decade in the Engineering Plastic business.
Copyright @ . All Rights Reserved by ANUMAN ENGINEERING INDUSTRIES.